Opening Saved Labels; Inserting Saved Text; Caring For Your Label Maker - Dymo LabelManager 280 Guia Del Usuario

Opening Saved Labels

You can easily open labels that are saved in memory.
To open saved labels
Do one of the following:
1
• Press and hold
• Press and then select
The first memory location is displayed.
Press or to select a label, and then press
2
The selected label is opened in the edit area.

Inserting Saved Text

You can insert the text of a saved label into the current
label. Only the saved text is inserted, not the formatting.
To insert saved text
Position the cursor at the location in the label where
1
you want to insert the text.
Press , select
2
Press or to select Saved text, and then press
3
.
The first memory location is displayed.
Press or to select the text to insert, and then
4
press .
The text is inserted in the current label.

Caring for Your Label Maker

Your label maker is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your label maker from time to time to keep it
working properly. Clean the cutter blade each time you
replace the label cassette.
for a few seconds.
.
, and then press
To clean the cutter blade
Remove the label cassette.
1
Press and hold the cutter button to expose the cutter
2
blade. See Figure 7.
.
.
Use a cotton swab and alcohol to clean both sides of
3
the blade.
The cutter blade is extremely sharp. Use caution
when cleaning.
To clean the print head
Remove the label cassette.
1
Remove the cleaning tool from inside the label
2
compartment cover. See Figure 8.
Gently wipe the padded side of the tool across the
3
print head. See Figure 8.
Print head
12
Cutter blade
Figure 7
Cleaning tool
Figure 8
Press and
hold