Scope Of Supply; Technical Features; How It Works; Structure Of The Instrument - Nedo Xliner3 Manual De Instrucciones

2 Scope of Supply

3 Technical Features

3.1 How it works

The X-Liner 3 projects a horizontal (H) and two
vertical (V1 + V2) laser lines that cross in front
of and above the unit. A plumb point (L) is
projected onto the floor, vertically below the
point at which the two vertical lines V1 and V2
intersect.
The X-Liner 3 is equipped with a pendulum for
self-levelling and levels out tilted positioning of
the unit by up to 3° in each direction.

4 Structure of the Instrument

4.1 Overview
Operating Instructions X-Liner 3
1. Transport bag
2. X-Liner 3
3. Batteries
4. Laser target board
5. Operating Instructions
1. Control panel
2. Laser exit window - horizontal and
vertical beam
3. Adjustable baselegs
4. Circular level
5. Pendulum/transport locking device
6. Battery compartment
7. BSW 5/8" threaded connection and
plumb beam exit window on the
underside
8. 360° setting ring
9. Knurled thumb screw for fine adjustment
(Adjustment range approx. ±3°)
www.rusgeocom.ru
EN
9