Cameo AURO SPOT 300 Manual De Usuario página 18

Mode Auto
Auto Mode
Auto Prog 8
AutoSpeed 225
MUSIC CONTROL (Sound)
Pressing the MODE button will take you to the selection menu for system settings (System Settings). Using the arrow buttons, select the menu item
"Mode" (dark background) and confirm by pressing ENTER. The digits which show the operating mode, change their colour to red, and you can use
the + and - buttons to select the desired Music control mode (Sound). By pressing ENTER to confirm, the microphone sensitivity can now also be
adjusted using the + and - buttons (Sen00% = minimum sensitivity, Sen99% = maximum sensitivity). Confirm with ENTER and press the MODE
button 2x to return to the main display. Now the spot is controlled by the built-in microphone and follows the beat of the music.
Mode Sound
Mode Sen99%
STATIC MODE (Static)
In the same way as with a DMX control unit, the static mode allows you to adjust all functions such as Pan, Tilt, colour and gobo wheel, and strobe
directly on the device applying values from 000 to 255. Thus, an individual scene can be created without an additional DMX controller. Pressing the
MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item "Mode" (dark background) and
confirm by pressing ENTER. The digits which show the operating mode, change their colour to red, and you can use the + and - buttons to select the
desired static mode (Static). After you have confirmed with ENTER, the parameters can be selected using the arrow buttons (see list). Press ENTER.
The value of the parameter can now be changed using the + and - buttons. Confirm the input with ENTER. Once all of the parameters have been set
as required, press the MODE button several times to return to the main display.
Mode Static
18