Technical Specifications - EURO-PRO Shark INFINITY NV31N Manual Del Usuario

GETTING TO KNOW YOUR CYCLONIC UPRIGHT
VACUUM
1. Ergonomic Grip
2. Telescopic Wand
3. Carry Handle
4. Cyclonic Chamber Bottom
Door Release
5. Cyclonic Chamber
6. Dust Cup
7. Debris Screen
8. Filter Indicator Light
9. Headlight
10. Carpet Height Adjustment
Knob
11. Furniture Guard
12. Handle Release
13. Carpet-To-Floor Selector
14. Lower Hose Holder

Technical Specifications

Voltage: 120V., 60Hz.
Power: 12 Amps
Note: Illustrations may differ from actual unit.
All manuals and user guides at all-guides.com
15. Super Stretch Hose
16. Crevice Tool
17. Upholstery Brush
18. Dusting Attachment
19. Upper Hose Holder
20. Telescopic Wand Height
Adjustment
21. Dust Cup Release Button
22. Quick Release Power Cord
Holder
23. Telescopic Wand Release
24. Power Cord Holder
25. On/Off Button
26. Bare Floor Brush
27. Pet Hair Power Brush
28. Access Port
3
ASSEMBLY INSTRUCTIONS
Thank you for purchasing an Infinity Vacuum. To ensure your vacuum
never loses suction, you must perform regular maintenance tasks.
Refer to your Owner's Manual for step by step instructions.
WARNING:
Always remove the power
plug from the electrical outlet before
assembling or removing accessories.
Inserting & Removing the
Telescopic Wand into the Main Unit
1. Insert the telescopic wand into the
opening at the top of the unit, making
sure that the telescopic wand height
adjustment knob is facing the back of
the unit. (Fig. 1)
2. Insert the handle into the top opening
of the telescopic wand making sure
that the handle lock release button is
facing towards the back of the
vacuum. Push handle down until you
hear it click into place. (Fig. 2)
3. To remove the telescopic wand, press
the telescopic wand release button
which is located on the back of the unit
and lift the telescopic wand up. (Fig. 3)
4. To remove the handle, press on the
handle lock release and lift the handle
up.
Telescopic
Wand
Height
Adjustment
Fig. 1
Handle
Lock
Release
Press
Fig. 2
Fig. 3
Attaching the Upper Hose Holder
1. Using a Philip's screwdriver, remove
the screw that is already attached to
the vacuum body. (Fig. 4)
2. Place the upper hose holder into the
slot in the back of the vacuum.
(Fig. 4)
3. Using the screwdriver and the screw
provided, attach the hose clip to the
vacuum. (Fig. 5)
Remove
Screw
Fig. 4 Fig. 5
Winding & Unwinding the
Power Cord
This vacuum cleaner is equipped with a
convenient cord storage feature. The
power cord winds around the two cord
holders at the side of the unit. The top
cord holder has a quick cord release
feature. Turn the cord hook to the left
or the right to remove the power cord.
(Fig. 6)
Fig. 6
4