Descargar Imprimir esta página

Technical Data; Technical Features; Technical Label; Transport And Installation - BAT Base Lite Manual Para Uso Y Mantenimiento

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Base Lite
5

Technical data

5.1 Technical features

Max. dimensions (mm) and weight (Kg)
Width (mm)
Projection (mm)
Approximate weight (Kg)
Roller tube (Ø)
Safety performance per EN13561
Wind resistance class
Nominal test pressure p(N/m
Water pooling resistance class
Wind speed (Km/h)
Total transmittance of solar energy g
MOTOR
Type
Specifications
For the specifications of the optional accessories, see Cap.10 "Optional Accessories", pag.25 and corresponding
instructions.
· The resistance to pooling water is tested with an inclination of 25%; retract the awning during rain if
the angle is less than this.
· The maximum load permitted for non-retractable parts is 800 Pa.

5.2 Technical label

The "technical label", which is on the inside cover of this manual, specifies the year in which the CE marking, the
manufacturer's data and the specific product data were applied.
6

Transport and Installation

6.1 Transport

Transport and shipping shall be borne by the reseller and/or the manufacturer, who shall transport the product
using adequate packages to protect it up until its delivery to the final customer.
Damage to the product sustained during removal and subsequent handling and/or transport, performed
after the initial installation, is not covered by warranty.
The packaging material must be disposed off and/or recycled pursuant to the applicable local legislation.

6.2 Installation

Assembly of the components, installation and first start of the product must only be performed by
specialised and qualified technicians, and is the responsibility of the reseller and/or manufacturer.
All instructions and the main safety standards to perform these operations are described in the "Assembly Manual"
and the "Installer Manual".
The position chosen by the user for the installation of the product must provide adequate support as well as the
space necessary for the structure to open fully (see "Installer Manual").
22
All manuals and user guides at all-guides.com
) α=1
2
tot
Use and maintenance manual
4500
2600
60-65
63-70
1
40
1
29
See attached label
See manual for installed motor
CE marking, approved for sun awnings
rev.04
05/09/2019

Publicidad

loading