Program Description; Bea-Pc Software Update By Means Of Usb Stick; Troubleshooting - Bosch BEA 065 Manual Original

en 24 | BEA 065 | Operation
4.6

Program description

i
Refer to the online help for further details on the
BEA-PC software.
4.7 BEA-PC software update by means of
USB stick
1. Insert the USB stick with the BEA-PC software up-
date into any USB port on the computer board (fig.
3, item 3 or 4).
 After a few moments, the <F7> Update softkey
appears on the start screen of the BEA-PC soft-
ware.
2. Press <F7>.
3. Follow the instructions on the screen.
|
1 689 989 318 2017-01-20
4.8

Troubleshooting

i
In case of Bluetooth transmission problems during
an emissions test, refer to the information given in
sec. 2.4.
No communication between BEA 065 and BEA 070
Possible causes What to do
No voltage supply. Test whether the BEA 070 is being
supplied with external voltage.
BEA 070 is not Check the connection type in the device
active or is incor- configuration:
rectly configured. "Settings >> Device Configuration",
Check connection: USB/BTB (Bluetooth).
No external network printer displayed under "Settings
>> Report"
In rare instances, no active printer is displayed in the
indicator panel. In this case, the BEA 750 must be re-
started.
Robert Bosch GmbH