Optional Accessories - Makita GA7070 Manual De Instrucciones

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
► Fig.36
-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
-
-
NOTE: *1 Only for tools with M14 spindle thread.
NOTE: *2 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *3 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
NOTE: *4 The Inner flange for the grinder equipped with the brake function when using together with the dust collect-
ing wheel guard.
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
180 mm
Wheel guard for depressed center grinding wheel / flap disc / wire wheel brush
Depressed center grinding wheel / Flap disc
Wheel guard for abrasive cut off wheel / diamond wheel *2
Inner flange 78 (Australia and New Zealand only) *3
Abrasive cut-off wheel / Diamond wheel
Outer flange 78 (Australia and New Zealand only) *3
-
-
-
-
Dust collecting wheel guard for offset diamond wheel
Side grip / Loop handle
Inner flange *1
Lock nut / Ezynut *1
Back up pad
Flex wheel
Rubber pad
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Side grip for dust collecting wheel guard
Dust collecting wheel guard for cut-off
Offset diamond wheel
Lock nut wrench
Dust cover attachment
17 ENGLISH
230 mm
Special flange *4
Diamond wheel