Optional Accessories - Makita GA7080 Manual De Instrucciones

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
► Fig.36
-
1
2 Wheel guard for depressed center grinding wheel / flap disc / flex wheel / wire wheel brush
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
-
-
NOTE: *1 Only for tools with M14 spindle thread.
NOTE: *2 Do not use Super flange and Ezynut together.
NOTE: *3 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *4 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
180 mm
Side grip / Loop handle
Inner flange / Super flange *1*2
Depressed center grinding wheel / Flap disc
Lock nut / Ezynut *1*2
Wheel guard for abrasive cut off wheel / diamond wheel *3
Inner flange 78 (Australia and New Zealand only) *4
Abrasive cut-off wheel / Diamond wheel
Outer flange 78 (Australia and New Zealand only) *4
-
-
-
Dust collecting wheel guard for offset diamond wheel
Offset diamond wheel
Dust cover attachment
Back up pad
Flex wheel
Rubber pad
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Side grip for dust collecting wheel guard
Dust collecting wheel guard for cut-off *4
Lock nut wrench
16 ENGLISH
230 mm
Diamond wheel