Bosch D-TECT 200 C Professional Manual De Instrucciones página 6

3. Updating
▶ Make sure the batteries of your D-tect 200 C are
fully charged
▶ Put the SD card with the update file into the
D-tect 200 C. Then, turn on the device
The update process starts automatically and
▶
takes a few minutes
Please be aware:
The D-tect 200 C will perform a restart during the
update process
▶ The tool indicates when the installation of the
update was successfully completed
4. Start working with your updated D-tect 200 C
▶ Turn off the device and remove the SD card
Delete the update file from the SD card
▶
Enjoy working with your updated D-tect 200 C!
▶
6