Connecting To A Power Source; Using The Rechargeable Batteries - Sony Walkman Atrac3plus D-NE9 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

B Connecting to a power source
You can use the following power sources:
• AC power adaptor (see "Playing an audio
CD or ATRAC3plus/ATRAC3/MP3 files")
• Rechargeable batteries
• LR6 (size AA) alkaline batteries (external
battery case)
For the battery life and charging time of the
rechargeable battery, see "Specifications."
Using the rechargeable
batteries
Charge the rechargeable batteries
before using it for the first time.
You can use only the following rechargeable
batteries for your CD player.
• NH-10WM (supplied)
• NH-14WM (not supplied)
1
Open the battery compartment lid
inside your CD player.
2
Insert two rechargeable batteries
by matching the 3 to the diagram
in the battery compartment and
close the lid until it clicks into
place.
28
-GB
Insert the # end first
(for both batteries).
3
Connect the AC power adaptor to
the EXT BATT/DC IN 4.5 V jack of
your CD player and an AC outlet,
then press x/CHARGE to start
charging.
to EXT BATT/
DC IN 4.5 V
AC power adaptor
to an AC outlet
Notes
• During charging, the CD player and the
rechargeable batteries become hot. This poses no
danger.
• If you press the jog lever during charging,
charging stops and playback of the CD starts.
x/CHARGE
button•CHARGE
lamp

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido