cecotec Ready Warm 8100 Power Quartz Manual De Instrucciones página 36

ENGLISH
Power cord
Heater head
Clamp
Knob
Upper support
Middle support
Power cord
Lower support
Base
4
5. Adjust the heater head's tilt angle, from 01 to 45º.
Heater head
Heater head support
5
Warning: This device must be placed at a distance of at least 1 m away from the nearest wall.
The heater head must be at least 30 cm away from ceilings and 1.80 m above the ground. The
device must be placed firmly on an even and completely horizontal surface.
Wall assembly
Warning: Do not overtighten bolts; only tighten with moderate pressure to avoid damaging
bolts or components of the heater.
36 READY WARM 8100 POWER QUARTZ