All manuals and user guides at all-guides.com
Always use NIOSH/OSHA approved respiratory protection appropriate
for the dust exposure. Direct particles away from face and body.
WARNING: ALWAYS USE SAFETY GLASSES. Everyday
eyeglasses are NOT safety glasses. Also use face or dust mask if
cutting operation is dusty. ALL USERS AND BYSTANDERS MUST
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ................... volts
Hz ................. hertz
min ............... minutes
or DC ... direct current
................. Class I Construction
..................... (grounded)
................. Class II Construction
(double insulated)
.../min .......... revolutions per minute ....................... speed
BPM ............. beats per minute
IPM ............... impacts per minute
SPM ............. strokes per minute
sfpm ............. surface feet
.....................
per minute
DESCRIPTION (FIG. 1, 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Nozzle
B. Blast port
C. Trigger switch
D. Variable speed knob
FIG. 1
A ......................amperes
W .....................watts
or AC ..........alternating
current
or AC/DC ...alternating
FIG. 2
........................or direct
current
n o ....................no load
n ......................rated speed
.....................earthing
terminal
.....................safety alert
symbol
20
E. Lock-on button
F. Suction port
G. Dust bag
D
C
B
A
B
F
G
A
E
F
H