Assembly And Adjustments - DeWalt DWB800 Manual De Instrucciones

All manuals and user guides at all-guides.com
INTENDED USE
Your DWB800 blower/vacuum has been designed for blowing and
cleaning applications, as well as light suction purpose.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This blower/vacuum is a professional power tools. DO NOT let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Prior to assembly and adjustment, always unplug tool.
Mounting the Nozzle for Blowing
Operations (fi g. 1)
Insert the pin located inside the nozzle (A) into the notch provided on
the blast port (B)
To lock nozzle in place, turn the nozzle in the direction indicated.
To remove nozzle, turn the nozzle in the opposite direction.
Mounting the Nozzle and Dust Bag for
Dust Collection (fi g. 2)
For dust collection, mount the dust bag at the blast port (B) and
nozzle at the suction port (F).
To remove dust bag and nozzle, simply pull out by first turning in the
opposite direction.
Empty the dust bag frequently to ensure maximum dust collecting
efficiency.
OPERATION
WARNING: Always observe the safety instructions and applicable
regulations.
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
Operating the Blower (fi g. 1, 3)
• To switch your blower on,
depress the switch (C). To
stop your blower, release
switch.
• Adjust variable speed knob
(D) for different speed
requirement.
• When continuous operation
is required, first depress the
switch and then the lock-
on button (E) and release to
disengage lock, squeeze and
release switch.
WARNING: Continuous running of machine should not exceed 30
minutes.
MAINTENANCE
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
21
FIG. 3
E
C