Denon AVR-2803 Instrucciones De Operación página 43

System setup items and default values (set upon shipment from the factory)
System setup
Input the combination of speakers in your
system and their corresponding sizes (Small for
Speaker regular speakers, Large for full-size, full-range) to
Configuration automatically set the composition of the signals
output from the speakers and the frequency
response.
q
Set the frequency (Hz) below which the bass sound
Crossover
of the various speakers is to be output from the
Frequency
subwoofer.
Subwoofer This selects the subwoofer speaker for playing
mode deep bass signals.
This parameter is for optimizing the timing with
which the audio signals are produced from the
w
Delay Time
speakers and subwoofer according to the listening
position.
This adjusts the volume of the signals output from
Channel
e
the speakers and subwoofer for the different
Level
channels in order to obtain optimum effects.
Input
source
Digital In This assigns the digital input jacks for the
r
Assignment different input sources.
Digital
Inputs
Video In This assigns the color difference (component)
t
Assignment video input jacks for the different input sources.
Dolby Digital Turn the audio compression on or off when down-
y
Setup mixing Dolby Digital signals.
Set this to switch the surround back
Power AMP
channel's power amplifier for use
Assignment
Zone2 for zone 2.
u
Control
Zone2 vol. This sets the output level for the
Level zone 2 output jacks.
Ext. In
i
Subwoofer Set the Ext. In Subwoofer terminal playback level.
Level
Auto
o
Surround Set the Auto surround mode function.
Mode
This sets whether or not to display the on-screen
On Screen display that appears on the monitor screen when
!0
Display the controls on the remote control unit or main unit
are operated.
Trigger Out Set the Trigger Out output for the different input
!1
Setup sources.
Auto Tuner FM stations are received automatically and stored
!2
Preset in the memory.
Set whether or not to lock the system setup
!3
Setup Lock
settings so that they cannot be changed.
Default settings
Surround Back
Front Sp. Center Sp. Sub Woofer Surround Sp.
Large Small Yes Small Small / 2spkrs
80 Hz
LFE
Front L & R Center Sub Woofer Surround L & R
3.6 m (12 ft) 3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft)
Surround Surround Surround Surround
Front L Front R Center
L R Back L Back R
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CD DVD VDP TV DBS V. AUX VCR-1 VCR-2
COAX1 COAX2 OPT1 OPT2 OPT3 OFF OFF OFF
VDP TV DBS VCR-1 VCR-2 V. AUX
DVD
VIDEO1 NONE NONE VIDEO2 NONE NONE NONE
OFF
Surround Back
Variable
Subwoofer = +15 dB
Auto Surround Mode = ON
On Screen Display = ON
PHONO CD TUNER TAPE DVD VDP TV DBS VCR-1 VCR-2
ON ON ON ON ON ON
OFF OFF OFF OFF
A1 ~ A8 87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 / 90.1 MHz
B1 ~ B8 522 / 603 / 999 / 1404 / 1611 kHz, 90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
Setup Lock = OFF
Surround modes and parameters
Sp.
Mode Front L/R CENTER
DIRECT C
STEREO C
C
EXTERNAL INPUT
II C
DOLBY PRO LOGIC
C
DTS NEO:6
SBL & SBR
C
DOLBY DIGITAL
3.0 m (10 ft)
C
DTS SURROUND
(DTS ES MTRX 6.1)
Subwoofer
5/7CH STEREO C
ROCK ARENA C
0 dB
JAZZ CLUB C
TAPE
VIDEO GAME C
MONO MOVIE C
OPT4
MATRIX C
—
VIRTUAL C
—
C:
Signal
E:
No signal
B:
Turned on or off by speaker configuration setting
V. AUX
ON
Signals and adjustability in the different modes
When
Channel output
playing
Dolby
Digital
SURROUND SUB- SURROUND
Signals
L/R WOOFER BACK L/R
E E B E C
E E B E C
B B B E
B
B B B B * C *
2 1
B B B B C *
1
B B B B C
B B B B E
B B B B C
B B B B C
B B B B C
B B B B C
B B B B C
B B B B C
E E B E C
C:
Able
E:
Unable
*
1 Only for 2 ch contents
*
2 Signal output can be changed with
the "SB CH OUT" surround
parameter setting.
ENGLISH
When When When
playing playing playing
DTS PCM ANALOG
signals signals signals
C C C
C C C
E E C
E C C
E C C
E E E
C E E
C C C
C C C
C C C
C C C
C C C
C C C
C C C
43