Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DIMENSIONS
INSTALLATION & USE
Operation of controls
a. Touch Control Model
The hood is operated using the touch control.
The on/off switch turns the hood on and off.
The light switch turns the lamps on and off.
The blower switch turns the blower on to three speed settings:
1 - LOW SPEED
2 - MEDIUM SPEED
3 - HIGH SPEED
4- With time delay setting 15 minutes.
Grease Filters
The grease filters should be cleaned frequently. Use a warm detergent solution. Grease filters are
washable.
See "INSTALL FILTERS" section for removal and installation instructions.
INSTALL THE DUCTWORK
(Ducted hoods only)
Caution: To reduce the risk of fire, use metal ductwork is preferred.
1. Decide where the ductwork will run between the hood and the
outside.
2. A straight, short duct run will allow the hood to perform most
efficiently.
3. Long duct runs, elbows, and transitions will reduce the performance
of the hood. Use as few of them as possible. Larger ducting may be
required for best performance with longer duct runs.
All manuals and user guides at all-guides.com
-25-
Publicidad
Tabla de contenido
