Power On/Off; Video Recording - WISEUPSHOP W3000 Manual Del Usuario

All manuals and user guides at all-guides.com
-1 × USB Cable
-1× AC110-230V to DC 5V Charging Adapter
III. Operation
>> Before using, please make sure your watch camera is fully recharged and
format the camera on your PC computer by using the USB cable provided.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue
and red indicator lights will be illuminated for 4 seconds then turn off. The camera
will start video recording automatically.
3.1.2. Power off the camera by pressing the Power Button for 3 seconds. Both blue
and red indicator lights will be illuminated for 2 seconds then turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any
operation more than 2 minutes.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue
and red indicator lights will be illuminated for 4 seconds then turn off. The camera
will start video recording automatically.
3.2.2. Press the Power Button twice to stop recording video. The blue indicator light
will stay illuminated, indicating the camera has entered into standby mode
automatically.
3.2.3. Press the Power Button once again to resume video recording. The blue
indicator light will turn off.
[Note]:
1). A video clip will be generated and saved every 10 minutes automatically.
2).The camera can record video for 2 hours continuously on a full charge.
3).Video Resolution: 1920x1080P Video Format: AVI
4). If the camera is in low battery, it will save video files and then shut down automatically.
Both blue and red indicator lights will flash alternately for 5 seconds then turn off together.
5). If the internal memory is full during the video recording process, the camera will save