Power On/Off; Video Recording - WISEUPSHOP W9100 Manual Del Usuario

All manuals and user guides at all-guides.com
-1 × USB Cable
-1 × AC110-230V to DC 5V Power Adapter
III. Operation
>> Please make sure your camera is fully recharged before using and the internal memory
has been formatted on your PC computer.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
green indicator lights will be illuminated for 2 seconds and then the green one will turn off
while the blue one will stay illuminated, indicating the camera has entered into standby
mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again in standby
mode. The green indicator light will flash 3 times and turn off with the blue one.
[Note]:
1). The camera will shut down automatically if it is in standby mode without any operation more than
3 minutes.
2). If the camera is running low on batteries, the blue indicator light will be illuminated for 8 seconds,
then the green indicator light will flash slowly for 30 seconds and flash twice quickly and turn off
afterwards, next, the blue one will turn off. The camera will shut down automatically.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
green indicator lights will be illuminated for 2 seconds and then the green one will turn off
while the blue one will stay illuminated, indicating the camera has entered into standby
mode automatically.
3.2.2. Press the Power Button once to start video recording. The blue indicator light will
flash 3 times and turn off.
3.2.3. Press the Power Button once again to stop video recording. The blue indicator light
will come on and stay illuminated, indicating the camera is back to standby mode.
[Note]:
1). A video clip will be generated and saved every 5 minutes automatically.