Dash Disassembly; Kit Preparation - Metra 95-7391B Instrucciones De Instalación

DASH DISASSEMBLY

1. Unclip and remove the top half of the
steering column shroud and gauge
cluster trim panel. These panels are
connected together by a piece of
material and will come out as one piece.
(Figure A)
2. Unclip and remove the a/c vent panel
surrounding the radio. (Figure B)
3. Remove (4) screws securing the radio.
Slide the radio out, then unplug and
remove the radio.
Continue to Kit Preparation
2
(Figure A)
(Figure B)

KIT PREPARATION

1. Cut the shaded area in the sub-dash to
allow room for the aftermarket radio.
(Figure A)
Continue to Kit Assembly
Remove shaded area
(Figure A)
|
386.257.1187 MetraOnline.com