Kit Assembly - Metra 95-7391B Instrucciones De Instalación

1. Secure the radio brackets to the radio
trim panel using the (4) #8 x 3/8"
Phillips screws provided. (Figure A)
2. Slide the radio into the bracket/panel
assembly, then secure it using the
screws provided with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Secure the radio assembly to the dash
using the factory screws.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 1/7/2022 INST95-7391B
3