Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
Assembly
1.
Flush through the supply pipes.
2.
Place the mixer including the sealing washer in
position on the sink.
3.
Slip the slide washer, washer and collar nut
over the hose and threaded base and tighten
the collar nut by hand.
4.
Tighten screws.
5.
Connect the supply pipes to the angle valves;
cold right - hot left.
6.
Connect the hose with hose nut, taper sleeve,
disc and washer.
7.
Mount the hose weight.
Large differences in pressure between the hot and
cold water supply should be balanced.
Operation
The mixer is actuated by lifting the lever head.
Swivel to the left = hot water, swivel to the right =
cold water.
The handspray can be drawn approx. 50 cm out of
the arm lining. The flow is changed from jet to needle
spray by applying slight pressure to the membrane
on top of the handspray. After the water flow has
been cut off, the mixer automatically reverts to the
jet mode.
If the waterflow drops, clean the filter located between
hose and handspray.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temperature: 65° C
Rate of flow:
jet: :
needle spray:
To adjust the hot water limiter on single lever mixers,
please see page 12.
No adjustment is necessary when using a continuous
flow water heater.
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled con-
tinuous flow heaters if the flow pressure is at least
1.5 bars.

English
To simplify installation pressure hoses no. 13098
are available.
A needle spray cannot be optained from the sink
mixer when used in conjunction with hydraulically-
controlled continuous flow heaters.

Spare parts

1�
1.1 screw cover
2�
3�
4�
5�
6�
7�
8�
9�
10�
11�
12�
13�
14�
15�
XXX = Colors
000 chrome plated
030 chrome plated/blue
040 chrome plated/white
060 chrome plated/black
090 chrome plated/gold plated
430 red
max. 10 bars
440 mocca
1 - 5 bars
450 white
16 bars
480 yellow
max. 80° C
490 white/gold
610 black
710 black/green/purple
11 l/min. 3 bars
840 fine brass
5 l/min. 3 bars
880 satin chrome
930 polished brass
handle for Allegroh
handle for Mondial
handle for Uno
flange
nut
service set
seals
mixer ball
hose
mesh washer
handspray
mousseur cpl.
brush
fixation cpl.
back flow preventor cartridge
Schaftverlängerung 35 m
16092XXX
94063XXX
15091XXX
13290XXX
13919XXX
13918XXX
13952XXX
13962XXX
13964XXX
96200XXX
94246XXX
13893XXX
13955XXX
13894XXX
13961XXX
94157XXX
13898XXX

Publicidad

loading