Antenna Connection - Disney DT1355-CAR Manual Del Usuario

All manuals and user guides at all-guides.com
OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED)
Follow the instructions for the type of antenna system you intend to use.
Combination VHF/UHF Antenna
(Single 75 ohm cable or 300 ohm
twin-lead wire)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
OR
If your combination antenna has a 300 ohm twin-
lead wire, use a 300-75 ohm matching
transformer (NOT SUPPLIED).
Separate VHF/UHF Antennas
Connect the 75 ohm cable from the VHF antenna
and the UHF antenna twin-lead wire to a
combiner (NOT SUPPLIED). Attach
combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-lead wire,
use a 300-75 ohm matching transformer, then
connect the transformer to the combiner.

Antenna Connection

Combination VHF/UHF Antenna
(Separate VHF and UHF 300 ohm twin-
leads)
Connect the UHF twin-lead wire to a combiner
(NOT SUPPLIED). Connect the VHF twin-lead to a
300-75
SUPPLIED). Attach the transformer to the
combiner. Attach the combiner to the antenna jack.
the
6
ohm matching transformer (NOT