Auto Search (Setting Tv Channels) - Disney DT1355-CAR Manual Del Usuario

Auto Search (Setting TV channels)

You can set your TV to receive local TV channels (from an
antenna) or Cable TV channels (when you have Cable TV
service). Then, use Auto Search to set up channels that are
available for you. This makes it easy for you to select only the
available TV stations when you press CH+ or CH-. Before you
start Auto Search, make the Antenna or Cable TV connection
described on pages 6 and 7. In the menu select TV or Cable
(CATV) as described on page 13.
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the Search menu.
3. Press CH+ or CH- repeatedly to select Auto Search.
4. Press VOL+ to start programming TV channels. Press VOL-
if you need to stop channel programming during the process.
When channel setup is completed, the TV will go to its lowest
channel.
Notes:
• Press CH+ or CH- to see which channels are in the TV's
memory. You can also select channels that have not been
memorized using the number buttons on the remote control.
If you have selected TV(antenna) on the previous page, enter a
two-digit channel number. If you have selected CATV(cable TV),
enter a three-digit channel number.
• To delete unwanted channels from the TV's memory or to add
more channels, see Add/Erase on page 17.
• You cannot select the SEARCH menu if the TV is set to a
video input channel (AV). Press TV/AV repeatedly to get to
regular TV programming.
All manuals and user guides at all-guides.com
14
PICTURE
Color 45
Brightness
50
50
Contrast 50
Sharpness
Sharpness 50
Tint 00
- +
Blue Back On
Noise Red. On
Color. Temp Normal
SEARCH
TV/CATV TV
Channel 2
Add/Erase Add
Manual
Up
Auto Search
Favorite List
SEARCH
TV/CATV TV
Channel 2
Add/Erase Add
Manual Up
Auto Search
Favorite List
Programming
P l e a s e W a i t
S t o p
TV 2