Maintenance; Maintenance Schedule - Husqvarna R 214 Manual Del Usuario

Ocultar thumbs Ver también para R 214:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. To release the parking brake, press the parking
brake pedal again.
To get a good cutting result
For best performance, do maintenance on the
product regularly as given in the maintenance
Maintenance schedule on page
schedule. Refer to
15 .
Do not cut a wet lawn. Wet grass can give a bad
cutting result.
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
1. PREPARE THE PRODUCT
Do a check of the battery.
Do a check of the blades.
Do a check of the belts and pulleys.
Do a check of the steering chain of the inner side of the frame tunnel.
Do an inspection, lubricate and adjust all wires.
Make sure that the tire pressure is correct. Refer to
Make sure that all screws and nuts are tightened with the correct torque.
Lubricate the operators seat.
Lubricate the wheels and blade bearings on the cutting deck.
Lubricate the pedals on the inner side of the frame tunnel.
Lubricate the belt tensioner.
Remove the wheels and lubricate the wheel axles.
2. ENGINE
Do a check of the fuel hose. Replace if it is necessary.
Replace the fuel filter.
Replace the air filter.
Do an inspection of the cooling fins on the hydrostatic transmission.
1590 - 007 -

Maintenance

Before you do any
Tire pressure on page 21 .
Start with a high cutting height and decrease it
gradually.
Cut with blades that rotate at high speed (highest
permitted engine speed, refer to
page 29 ). Move the product forward at low speed. If
the grass is not too high and thick, you can get a
good cutting result also at a higher speed.
Cut the grass in an irregular pattern.
To get the best cutting result, cut the grass
frequently and use the Bioclip

Maintenance schedule

First
servicing
First
servicing
Technical data on
®
function.
Maintenance interval
in hours
50
100
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Maintenance interval
in hours
50
100
O
O
Clean
O
O
200
200
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

R 214c

Tabla de contenido