Electrical Diagram; Cleaning And Maintenance - Melchioni Family BLANCO PLUS Manual De Usuario

To activate the Detector of open windows function, press the ▲ key for about 10 seconds (on the display appears
,
to deactivate it, press the ▼ key for about 10 seconds. If the open window detector intervenes, it will be necessary to close
windows, doors or other openings, and then press the button to reactivate the appliance.
To deactivate the appliance, press the button , then the switch in pos. 0 and remove the plug from the socket.

ELECTRICAL DIAGRAM

TROUBLESHOOTING
If the heater does not work, follow these instructions:
• Make sure the switch or fuse is working properly.
• Make sure the heater is plugged in and that the electrical outlet is working properly.
• If the ON / OFF switch is not illuminated in the ON position, take the appliance to a service center for repair.
NOTE: IF YOU HAVE A PROBLEM WITH THE HEATER, PLEASE READ THE WARRANTY INFORMATION. PLEASE
DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER. Doing so may void the warranty and may cause damage
or personal injury. IF THE PROBLEM STILL PERSISTS, CONTACT THE DISTRIBUTOR.

CLEANING AND MAINTENANCE

Before cleaning the heater, turn it off and let it cool down. Disconnect the power supply from the appliance. The exterior
can be cleaned by wiping it with a soft, damp cloth and then drying it. Do not use abrasive cleaning powders or furniture
polish, as this may damage the surface finish. To free the heater from the wall, for cleaning or redecorating, just remove
the screw caps and unscrew the screws themselves to remove the heater from the wall.
For short-term storage, just disconnect the heater and leave it hanging; for long-term storage, you can remove it from the
wall or cover it.
Attention: before cleaning the appliance, switch it off, unplug the plug from the socket and wait for it to cool down.