Securing Children In Stroller - GAGGLE JAMBOREE 6 Manual Del Usuario

Avoid Serious Injury To Children From Falling Or Sliding Out:
• ALWAYS use a harness to restrain each child.
• Snugly adjust harness around each child.
• NEVER leave children unattended, even when sleeping.
Always keep children in view.
• DO NOT allow children to climb on stroller or stand in seat.
1.
With harness unbuckled, place child in seat.
2.
Secure child with harness by positioning Crotch
Strap between child's legs and placing Shoulder
and Waist Belts over shoulders and thighs.
Snap buckle tongues into crotch strap buckle
(Fig. 1).
3.
Snugly adjust each strap by pulling on the
free end of the strap and moving plastic
loop along strap (Fig. 2).
Shoulder Belt Height Adjustment:
Use shoulder belt slots that
are closest to child's shoulders.
To change shoulder belt height:
1.
Remove shoulder belt from seat
back of seat - on back of seat, tip
shoulder belt anchor in line with
shoulder belt and then push belt
anchor and shoulder belt through
slot in seat back (Fig. 1).
2.
Reattach shoulder belt to seat back - on
front side of seat, tip shoulder belt anchor to
contact shoulder belt, push belt anchor and
shoulder belt through slot in seat back at
desired height. Rotate belt anchor to lay
flat on back of seat (Fig. 2).
Repeat for opposite shoulder belt.
Crotch Belt Adjustment:
1.
To lengthen crotch belt - slide plastic loop up
on crotch belt (Fig. 2).
2.
To shorten crotch belt - slide plastic loop
down on crotch belt (Fig. 2).

Securing Children In Stroller

WARNING
Crotch
Strap
Plastic
Loop
Slot in Seat Back
Shoulder Belt
Slot in Seat Front
Shoulder Belt
12
Shoulder
Belts
Fig. 1
Crotch
Strap
Buckle
Waist
Belts
Fig. 2
Crotch
Strap
Plastic
Buckle
Loop
Fig. 1
Shoulder
Belt
Anchor
Fig. 2
Shoulder
Belt
Anchor