Step 4 - Rear Basket Tube Assembly; Step 5 - Arm Bar Operations - GAGGLE JAMBOREE 6 Manual Del Usuario

1.
Position Rear Basket Tube (G) with curved
bend (W) pointing down (Fig. 1).
2.
Secure the Rear Basket Tube onto the stroller by
sliding the ends of the Rear Basket Tube onto the
tubes at the side of the stroller frame until the ends
contact the spring buttons (Fig. 1).
3.
Press the spring buttons
Tube onto the tubes
into the holes in the Rear Basket Tube (Fig. 2).
4.
Pull out on the Rear Basket Tube to check that
it is securely attached
5.
Attach fabric basket to Rear Basket Tube.
- Unsnap snaps (X) on fabric basket (Y), wrap fabric
basket over the top of the basket tube (Z) and
reattach snaps on fabric basket (Fig. 3).
Arm Bar Attachment:
Push arm bar post (1) into the hole in the arm bar base (2) until
it clicks into place. Repeat on other side (Fig. 1).
Arm Bar Removal:
1.
Push and hold release button (1) located on the bottom of the
arm bar. While holding release button, pull arm bar out to remove it
from one side of the stroller (Fig. 2).
2.
To remove arm bar completely, repeat step 1 on the opposite side
of the stroller.

STEP 4 - Rear Basket Tube Assembly

1 and slide the Rear Basket
until the spring buttons lock
2
(Fig. 2).
3
STEP 5 - Arm Bar
G
W
X
7
3
Y
Z
Fig. 2
Fig. 1
Fig. 2
2
1
Fig. 3
Fig. 1
1
2
1