About This Document; General Safety Precautions - STEINEL XLED PRO 240 Manual Del Usuario

GB

1. About this document

Please read carefully and keep in a safe place.
– Under copyright. Reproduction either in whole or
in part only with our consent.
– Subject to change in the interest of technical
progress.
– All product dimensions in mm.
Symbols
!
Hazard warning!
Reference to other information
... in the document.
Note:
Diagrams without captions apply to all versions.

2. General safety precautions

Disconnect the power supply before
!
attempting any work on the unit.
• Installing the LED floodlight involves work on the
mains voltage supply; installation must therefore
be carried out professionally in accordance with
the applicable national wiring regulations and
electrical operating conditions (DE-VDE 0100,
AT-ÖVE/ÖNORM E 8001-1, CH -SEV 1000).
• The LED floodlight must be positioned so that it
is not expected that anybody can stare into the
light for any prolonged period from a distance of
less than 0.3 m.
• The floodlight enclosure heats up when the light
is on. Only adjust the angle of the LED panel
once it has cooled down.
• Do not install the LED floodlight on (normally)
flammable surfaces.
3. XLED PRO 240 S / XLED PRO 240
Proper use
– LED floodlight suitable for wall mounting
outdoors.
– Fully swivelling LED panel.
– Can be used on its own or interconnected with
other floodlights.
Non-intended use
– The LED floodlight cannot be dimmed.
Not dimmable
XLED PRO 240
– Wired interconnection.
– Operation via control dial.
XLED PRO 240 S
– The sensor-switched LED floodlight contains an
infrared motion detector.
Movement triggers lights, alarms and many other
devices. With the fully swivelling panel, the LED
floodlight can be used at home to provide perfect
illumination for lighting up property, or commercially
for lighting up business premises. In conjunction
with the opal cover, this extremely efficient technol-
ogy provides wide-area lighting.
Models
– XLED PRO 240 S
– XLED PRO 240
XLED PRO 240 S package contents (Fig. 3.1)
XLED PRO 240 package contents (Fig. 3.2)
XLED PRO 240 S adjustment range
(Fig. 3.3/3.4/6.4)
Adjustment range for XLED PRO 240
(Fig. 3.5/3.6/6.4)
XLED PRO 240 S product dimensions
(Fig. 3.7/3.8)
XLED PRO 240 product dimensions (Fig. 3.9/3.10)
XLED PRO 240 S product components (Fig. 3.11)
A LED panel
B Enclosure
C Wall mount
D Corner wall mount (optional)
E Twilight setting
F Time setting
G Sensor unit
H Ring cover
XLED PRO 240 product components (Fig. 3.12)
A LED panel
B Enclosure
C Wall mount
D Corner wall mount (optional)
Luminous intensity distribution (Fig. 3.13)
– 15 –
GB