Manufacturer's Warranty - STEINEL XLED PRO 240 Manual Del Usuario

Note:
When setting the detection zone, we recommend
selecting the shortest time.
Note:
After the LED floodlight switches OFF, it takes
approx. 1 second before it is able to start detecting
movement again. The LED floodlight will only
switch ON in response to movement once this
period has elapsed.
• Fit ring cover on sensor unit. (Fig. 6.3)
Other information:
Floodlight adjustment range (Fig. 6.4)
Shrouds (Fig. 6.5)
The film shroud can be used for masking out any
number of lens segments to limit reach as required.
Inadvertent triggering is ruled out or the sensor can
be targeted to watch over danger spots (Fig. 6.6).
Setting functions
– Setting via control dial
Note:
The settings last selected on the control will be used.
7. Operation/maintenance
The LED floodlight is not suitable for burglar alarm
systems as it is not tamperproof in the manner pre-
scribed for such systems. Weather conditions may
affect the way the LED floodlight works. Strong
gusts of wind, snow, rain and hail may cause the
light to come ON when it is not wanted because
the sensor is unable to distinguish between sudden
changes in temperature and sources of heat.
The detector lens may be cleaned with a damp
cloth if it gets dirty (do not use cleaning agents).
Important note: the control gear cannot be replaced.
G B
8. Disposal
1
Y E A R
Electrical and electronic equipment, accessories
and packaging must be recycled in an environmen-
MANUFACTURER'S
WARRANTY
tally compatible manner.
3
Y E A R
MANUFACTURER'S
WARRANTY
– 17 –
Do not dispose of electrical and
electronic equipment as domestic
waste.
EU countries only: Under the current European
Directive on Waste Electrical and Electronic Equip-
ment and its implementation in national law, electri-
cal and electronic equipment no longer suitable for
use must be collected separately and recycled in
an environmentally compatible manner.

9. Manufacturer's Warranty

As purchaser, you are entitled to your statutory
rights against the vendor. If these rights exist in
your country, they are neither curtailed nor restrict-
ed by our Warranty Declaration. We guarantee
that your STEINEL Professional sensor product
will remain in perfect condition and proper working
order for a period of 5 years. We guarantee that
this product is free from material-, manufacturing-
and design flaws. In addition, we guarantee that all
electronic components and cables function in the
proper manner and that all materials used and their
surfaces are without defects.
Making Claims
If you wish to make a claim, please send your
product complete and carriage paid with the original
receipt of purchase, which must show the date of
purchase and product designation, either to your
retailer or contact us at STEINEL (UK) Limited,
25 Manasty Road, Axis Park, Orton Southgate,
Peterborough, PE2 6UP, for a returns number.
For this reason, we recommend that you keep your
receipt of purchase in a safe place until the warranty
period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
For information on making claims under the
terms of the warranty, please go to
www.steinel-professional.de/garantie
If you have a warranty claim or would like to ask
any question regarding your product, you are wel-
come to call us at any time on our Service Hotline
01733 366700.
5
Y E A R
MANUFACTURER'S
WARRANTY
GB