Technical Features - Phonocar VM064 Manual De Instrucciones

Ocultar thumbs

Contenido

página de 25

/ 25
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

VM064

USB and SD CARD

When a USB stick or SD CARD is plugged in, playback of the audio tracks starts automatically.

Play/Pause = press button 1

Next/previous track = press the FORWARD (9) and BACK (10) buttons.

Fast forward/back track = press and hold the FORWARD (9) and BACK (10) buttons.

Enable/disable the INT (track introduction) function = press the 2 INT (18) button.

Enable/disable Repeat function (track/folder repeat) = press 3 RPT (17) button.

Enable/disable the Random function (random track playback) = press 3 RDM button (16).

Move to the previous/next folder = press the 5 DIR- (15) and 6 DIR+ (14) buttons.

AUX-IN

Music can be played on the vehicle's system from external sources such as smartphones or tablets by connecting them to the AUX input (11)

of the car radio via a 3.5 jack cable.

Tracks can be played back and managed while the device is connected.

Bluetooth Handsfree function and A2DP

To start Bluetooth hands-free and A2DP functions:

1. activate the Bluetooth function on your smartphone

2. select the device called CARKIT

3. enter the password 0000 and confirm.

The Bluetooth Handsfree function allows you to manage calls via the car radio, facilitating safe driving.

To pick up a call, press the Pick up Call button (4).

To end the call, press the End Call button (5).

The Bluetooth A2DP function allows you to listen to music from your smartphone on the vehicle system.

NB. this function can only be used if the smartphone is compatible with the A2DP protocol.

Use the MODE button (7) to select BT MUSIC as source.

Play/Pause = press button 1

Next/Previous track = press the FORWARD (9) and BACK (10) buttons.