Recalling Preset Radio Stations - Sony ST-SE200 Manual De Instrucciones

Recalling Preset Radio Stations

This tuner lets you recall preset stations directly, by
entering the number of the preset you desire, or by
scanning the preset memory.
Recalling a preset station directly
1
Press BAND to select either FM or AM.
2
Use the number buttons (1-9, 0/10 and >10) to
select the preset number you desire.
To select press
5 5
10 0/10
15 >10 / 1 / 5
20 >10 / 2 / 0/10
3
Repeat steps 1 and 2 to recall other stations.
Scanning the preset memory
MEMORY SCAN
1
Press BAND to select FM or AM.
2
Press MEMORY SCAN.
A preset number flashes in the display.
3
Press TUNING + or –.
Press + to scan higher preset numbers.
Press – to scan lower preset numbers.
Each station received will be heard for about four
seconds.
4
Number buttons
BAND
TUNING (+/–)
BAND
Tuner Operations
Press MEMORY SCAN again as soon as the
station you desire is tuned in.
This stops the memory scan.
If a certain preset station cannot be tuned by
scanning
Preset stations with weak signals may be skipped.
Tune in the station manually.
7 GB