Battery Change; Care And Maintenance; Technical Data - Hydas hydrOfit Instrucciones Servicio

PROGRAMM
By pressing the programme button the appliance changes in programme
mode: automatic change between intensities.
HEAT ON/OFF
The heat button serves for switching on or off the heater. If the heater is
switched on, a red LED lamp at the unit lights up (below infrared sensor).
For the avoidance of the bathwater cooling down too fast always switch on
the heater. The appliance switches automatically off after 15 minutes. Set
ON/OFF and emergency switch on position "0".

Battery change

To change the battery, use a coin to open the back of the
battery compartment of the remote control. Once the bat-
teries are inserted, use the coin again to close the battery
compartment cover.
e
Care and maintenanc
The appliance is maintenance-free. You should occasionally clean it with
a soft, damp cloth. Cleaning the mat is as simple as it could be. Simple
cleaning with the shower head or a sponge. Use a mild household cleaner
or soapy water in conjunction with this.

Technical Data

Type: F174
230V – 240V AC 50Hz
Total absorption: 450W
automatic switch-off after 15 minutes, running pause min. 10 minutes
Remote control: Battery operated 3V CR 2032
For the sake of the environment, Vwe request that you take packaging
material to be recycled (collection points).
IPX4
17