Publicidad
Idiomas disponibles
Idiomas disponibles
E2 : Induction coil is too high, switch
the hob off by pressing on/off button
and let the coil cool down
E3 : Supply voltage is other than the
rated values. Switch the hob off by
pressing on/off button,wait until "H"
disappears for all zones, switch the
hob on by pressing on/off button and
continue to use. If the same error is
displayed again, call an authorised
service agent.
E4 : Supply frequency is different from
the rated values. Switch the hob off
by pressing , wait until "H" disappears
from all zones, switch the hob on by
pressing and continue to use. If the
same error is displayed again, switch
the plug for the appliance off and on.
Switch the hob on by pressing and
continue to use. If the same error is
displayed again, call an authorised
service agent.
E5 : Internal temperature of the hob is
too high, switch the hob off by pressing
on/off button and let the heaters cool
down.
E6 : Communication error between
the touch control and heater. Call an
authorised service agent.
E7 : Coil temperature sensor is disab-
led. Call an authorized service agent.
E8: Cooler temperature sensor is
disabled. Call an authorized service
agent.
EA: Large Coil Saturation Error.
Switch the hob off by pressing on/off
button, switch the hob on by pressing
on/off button and continue to use. If the
same error is displayed again, call an
authorised service agent.
EC : Supply Voltage Error.Switch
the hob off by pressing on/off button,
switch the hob on by pressing on/off
button and continue to use. If the same
error is displayed again, call an autho-
rised service agent.
C1-C8 : Mcroprocessor alert. Switch
the hob off by pressing on/off button,
switch the hob on by pressing on/off
button and continue to use. If the same
error is displayed again, call an autho-
rised service agent.
Publicidad
