Product Description; System Specifications; Component Specifications - 3M DBI SALA NANO-LOCK 3100273 Manual Del Usuario

;
Prior to installation of this equipment, record the product identification information from the ID label in the "Inspection and
Maintenance Log" located at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.

PRODUCT DESCRIPTION:

Figure 1 illustrates the 3M™ DBI-SALA® Nano-Lok™ Connected Order Picker System. The components of the system work
together to create an electronic field that detects the user's presence within the order picker vehicle. When the user is not tied
off with the Self-Retracting Device (SRD) and attached Carabiner, the Feedback Lights will flash and an alarm will sound.
Figure 2 illustrates components of the Connected Order Picker System. The Connected Sensor Box (1) detects the user's
presence within the cab. The Power Input (A) receives the power cable and directs power to the system. The Feedback Output
Plugs (B) move power from the Sensor Box and into the Feedback Lights (C), which flash in response to the tie-off status of the
user. The Housing (D) holds the pieces of the Sensor Box together. The Adjustable Grip (E) enables the Sensor Box to be secured
to the cab top of an order picker vehicle. The Pairing Button (F) is used to pair the Sensor Box with the Connected Carabiner.
The Nano-Lok Self-Retracting Device (2) is attached to the cab top of the order picker and arrests the user in the event of a
fall. The Lifeline (A) extends and retracts with movement of the user, locking at the sudden application of downward force. The
Energy Absorber (B) breaks in the event of a fall, absorbing the energy of the impact. The Housing (C) contains the drum-wound
Lifeline. The Swivel (D) receives the Cab Mount (E), which secures the SRD to the cab top of the order picker vehicle.
The Connected Aluminum Carabiner (3) detects and passes information regarding the user's tie-off status to the Sensor Box.
The Connection Eye (A) enables the SRD to secure to the Carabiner. The Gate (B) opens and closes around the attachment
point, allowing the Carabiner to secure to the dorsal D-ring of a Full Body Harness. The Shroud (C) is attached to the body of the
Carabiner and contains all of its electrical components.

System Specifications:

1 Person with a combined weight (including clothing, tools, etc.) of no more than: 310 lb. (140 kg)
Capacity:
for compliance with ANSI standards, or 420 lb. (191 kg) for compliance with OSHA.
The Connected Order Picker System is designed to be attached to the cab top of an order picker
vehicle. For the system to be used, the vehicle must be capable of withstanding the following values:
Anchorage:
The Connected Order Picker System must be used for Fall Arrest applications only. All components of
the system must be used in conjunction with one another.
Dimensions: See Figure 1 for the dimensions of each component of the Connected Order Picker System.
The weight of the Connected Order Picker System is 3.94 lb. (1.79 kg). See Figure 1 for the weight
Product Weight:
values of individual components.
Components of the Connected Order Picker System are certified to the following standards:
Standards:
Maximum
The Maximum Arresting Force shall be limited to no greater than 1,350 lbf (6 kN).
Arresting Force:
Battery Use: The Connected Aluminum Carabiner is compatible with CR2032 coin cell batteries only.
Service 0°C to 30°C (32°F to 86°F)
Temperature: Service Temperature Range

Component Specifications:

Figure 2
Reference Component
1 Connected Sensor Box
2 Nano-Lok Self-Retracting Device (SRD)
3 Connected Aluminum Carabiner
;
See below for the specifications of each system component.
Table 1 – Specifications
ANSI/OSHA 5,000 lbf (22.2 kN)
Kit Description SRD Model
Nano-Lok SRD
3101737
(2000037)
Nano-Lok SRD
3101738
(2000037C)
Certifications
ANSI Z359.14 (Class B)
OSHA 1926.502, 1910.140
CSA Z259.2.2-17
10