Operating Your Transmitter 8 - Progress Lighting AirPro P250070 Manual De Instalación

Remote Control Button Definitions:
1. "0 , 1 , 2 , 3 , 4 , 5 , 6" buttons:
These seven buttons are used to set the fan
speed as follows:
0 = Turn the fan OFF
1 = Minimum speed
2 = Low speed
3 = Medium low speed
4 = Medium speed
5 = Medium high speed
6 = High speed
2. If using an optional light kit, The "
button turns the light ON or OFF and also
controls the brightness setting. Press and
release the button to turn the light ON or OFF.
Press and hold the button to set the desired
brightness.
3. " " button: Reverse switch (control the
direction)
Figure 17
Installing the Remote Control
Holder and Battery
"
Attach the remote control holder with the
remote control holder mounting screw.
(Figure 18)
Install a 3V battery (included) into the remote
control. To prevent damage to the remote
control, remove the battery if not use for long
periods. (Figure 18)

Operating Your Transmitter 8.

Step 1
Step 5
Step 7
x 2
Figure 18
Step 2 Step 3
Step 4
Step 6
Step 8