Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Surface Units

How Induction Surface Cooking Works
The elements beneath the cooking surface produce a
magnetic field that generates heat in ferrous metal pans
that are in close proximity.
The cooking surface itself does not heat. Heat is
produced in the cooking pan, and cannot be generated
until a pan is placed on the cooking surface.
When the element is activated, the pan begins to heat
immediately and in turn heats the contents of the pan.
Magnetic induction cooking requires the use of cookware
stick, such as iron or steel.
Use pans that fit the element size. The pan must be large
enough for the element to detect the pan and be able to
deliver full power.
The cooktop will not operate if a very small steel or iron
utensil, such as a steel spatula, cooking spoon, knife
or other small utensil, is placed on the cooking surface
when the unit is turned on.
Operating the Cooktop Elements
WARNING
FIRE HAZARD: Never leave the
range unattended with the cooktop on medium or
high settings. Keep flammable items away from the
cooktop. Turn off all controls when done cooking.
Failure to follow these instructions can result in fire,
serious injury or death.
Before using the cooktop for the first time, clean it with
CERAMA BRYTE
Ceramic Cooktop Cleaner. This helps
®
protect the top and makes cleanup easier.
Throughout this manual, features and appearance may
vary from your model.
Place your Induction designed cookware on the cooking
surface. Push the knob in and turn in either direction to
the setting you want.
A knob indicator light will glow when any surface unit is on.
For glass cooktop surfaces:
A HOT COOKTOP indicator light will:
approximately 150°F.
8
CAUTION
while turned ON and after they have been turned OFF.
The glass surface may be HOT from residual heat
transferred from the cookware and burns may occur.
with hands. Always use mitts or pot holders to protect
hands from burns.
Doing so may permanently damage the appearance of
the ceramic cooktop.
The pan material is correct if a magnet sticks to the bottom.
At both OFF and HI the control clicks into position. You may hear slight
clicking sounds during cooking, indicating the control is maintaining
your desired setting.
Be sure you turn the control knob to OFF when you finish cooking.
29-6265 Rev. 0

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cchs950p

Tabla de contenido