How To Use - Gima ET-100B Manual Del Usuario

Termómetro digital de oído por infrarrojos
Ocultar thumbs Ver también para ET-100B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7
Cautions
1. Before measuring, the thermometer shall be stabilized at least 30min under operating
condition.
2. Please keep your ear canal clear, if not, the measuring result shall be inaccurate.
3. The symbol '
4. The time between each reading should be not less than 12 Seconds otherwise there is not
any change on the LCD.
5. Please don't scratch the probe lens, if not the thermometer shall lose the efficacy;
6. If the LCD no changes under pressing any button, please take the battery out and put in
again.
7. Please don't use the thermometer if your ear canal has been inflammation.
8. Do not expose this thermometer to electric shock.
9. Do not expose the thermometer to sunlight or to water.
10. Do not modify this device without authorization of the manufacturer.
11. Do not use near strong electromagnetic fields, i.e. Keep it away from any radio systems
and mobile phones.
12. This device must always be kept in a clean, dry area.
13.
Degree of protection against electric shock is Type BF applied part.
14.
The disposal of battery and device shall comply with the local environment requirements
15. This device include small parts, don't inhale or swallow it.
16. Do not apply a strong shock to, drop, step on, or vibrate the main unit.

How to use

Measuring human body temperature in the Ear Canal.
1. Press the 'on/recall' button to turn on the thermometer,
a beep sound is heard and the LCD displays as Fig. A in
one second.
When the LCD displays as Fig. B, now ready to measure.
2. Straighten the ear canal by pulling the outer ear up and
back to give a clear view of the eardrum.
- For children under 1 year, Pull the ear straight back.
- For children ages 1 year to adult, Pull the ear up and
back. (Caution: Many pediatricians suggest use of ear
thermometers for children older than 6 months.)
3. While pulling the outer ear, insert the probe snugly into
the ear canal (best to insert deep), press the 'scan' button.
Release it when you hear a beep sound. A beep indicates
measurement is complete.
Remove the thermometer from the ear. The display show
the measure temperature.
4. Measuring again: If measuring again, please unclinch the
'scan' button and wait for the '
press 'scan' button to measure again. Note: The time
between each reading should be not less than 12 seconds otherwise there is not any
change on the LCD.
5. Memory seach: Press the 'on/recall' button, the last ten memories (NO.9-NO.0) will take
turns to display on the LCD as Fig. C and Fig. D.
6. The LCD will displays 'Er 1' as Fig. E and cannot displays temperature when the ambient
temperature is out of the range of 16°C to 35°C.
All manuals and user guides at all-guides.com
' on the LCD shows you can measure in the ear;
' symbol to display, then
ENGLISH
Fig. A
newborn -
1 year-adult
1 year
Fig. C
Fig. B
Fig. D
Fig. E

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

25579

Tabla de contenido