Charge Your Gear; Flashlight; Replaceable Battery; Troubleshooting - GOAL ZERO SWITCH 10 Guia Del Usuario

CHARGE YOUR GEAR

Goal Zero Switch 10 is designed to charge POV cameras,
phones, and other handheld USB-powered gear.
What It Powers:
POV Camera Phone
2x 1x
1. Using your gear's charging cable, plug into Goal
Zero Switch 10's USB output.
2. Goal Zero Switch 10 will automatically begin
charging when you plug in your gear.
You can also use the micro-USB cable included with
Switch 10 to charge compatible devices.

FLASHLIGHT

Built-In Flashlight
Goal Zero Switch 10 also comes
with a small, built-in flashlight.
Turn it on/off by lightly pressing
the button on the light.
Built-In
Flashlight Button
6
7"
Tablet
25% Boost

REPLACEABLE BATTERY

The battery inside the Goal Zero Switch 10 is
replaceable. Over time, the lithium battery inside Goal
Zero Switch 10 will lose its efficiency. If you notice
your Goal Zero Switch 10 isn't holding a charge, or is
no longer charging your gear as much, it might be time
to replace the battery.
1. Unscrew the USB charging end (Bottom) of Goal
Zero Switch 10 by grasping the black cap and
twisting to the left.
2. Remove the old battery and insert the new Goal
Zero 18650 lithium battery in either direction.
3. Reattach the black cap and plug Goal Zero Switch
10 into a live USB port.
You'll need to purchase the replacement a Goal Zero
18650 lithium battery from GoalZero.com – please
note, Goal Zero Switch 10 is not compatible with
any other 18650 lithium battery. Our batteries are
engineered with built-in protections and are optimized to
power Goal Zero gear.

TROUBLESHOOTING

Goal Zero Switch 10 Reset:
Plug Goal Zero Switch 10 into any live USB port to reset it.
7