General Information - Oleo-Mac PW 125 C Manual Del Usuario

TRANSLATION OF THE ORIGINAL
GB
Thank you for choosing our product; we wish to remind you that it has been designed and produced
paying the greatest attention to the safety of the operator, the efficiency of its work and to the
protection of the environment.
In order to keep these characteristics in time, please read the instructions manual carefully and
comply meticulously with its content.
The Manufacturer is not to be held responsible for damages caused by:
• the failure to comply with what is contained in the instruction manual;
• a use of the machine different from those indicated in the
• a use failing to comply with the current standards concerning safety and accident prevention at
work;
• incorrect installation;
• inadequate maintenance;
• modifications or operations that have not been previously authorised by the manufacturer;
• the use of non original spare parts or parts that are not suitable for the machine model;
• repairs that are not carried out by a
USE AND RETENTION OF THE INSTRUCTION MANUALS
The instruction manuals are an integral part of the machine and must be kept in a secure place,
that allows their prompt consultation when required. In the event of their deterioration or loss,
ask for copy from your retailer or from an authorised assistance centre. The instruction manuals
must accompany the machine in the event it changes owner.
•
QUALIFIED TECHNICIAN:
and authorised to carry out supplementary maintenance operations and repairs on the machine.
The operations on the electrical parts must be carried out by a
also a
QUALIFIED ELECTRICIAN
to carry out the controls, installation and repair of electrical appliances, in a workmanlike manner
and in accordance with the current standards of the country where the machine is installed.
• machine function that is activated when the lever of the gun is released during normal
BY-PASS:
use. In this condition, the pressure gauge indicates lack of pressure and the pumped water is
sucked back thanks to the pressure regulation valve.
• device that when present immediately stops the machine cleaner after the lever of
TOTAL STOP:
the gun has been released or after a few seconds of running in the by-pass mode (
).
STOP
INSTRUCTIONS

GENERAL INFORMATION

QUALIFIED TECHNICIAN.
DEFINITIONS
a person, normally from the assistance centre, who is suitably trained
, meaning a person who is professionally certificated and trained
paragraph
"APPLICATIONS"
SPECIALISED TECHNICIAN
GB
who is
TIMED TOTAL
15