geberit AQUACLEAN SELA Manual Del Usuario página 31

Testing the remote control
The remote control must be closer than one
metre to the receiver to enable it to detect
the Geberit AquaClean Sela during
commissioning.
Prerequisite
– The function test on the lateral control panel was
performed successfully.
1
Insert battery.
Press the <+> button on the control panel
and the remote control at the same time,
until the <Shower> button lights up for two
seconds on the remote control. The remote
control can then only be used for the
assigned shower toilet.
18014401309410443-1 © 11-2017
966.102.00.0 (06)
All manuals and user guides at all-guides.com
2
3
4
Press the Shower button.
ü The spray arm extends and the shower
starts.
Increase or decrease the spray intensity by
pressing the <->/ <+>buttons.
Change the spray arm position by pressing
the arrow keys.
EN
31