geberit AQUACLEAN SELA Manual Del Usuario página 29

Tests after installation
Switching on Geberit AquaClean
Sela
Prerequisite
– The Geberit AquaClean Sela has been mounted
and connected.
1
Open ball valve.
2
Fit the spray shield.
18014401309410443-1 © 11-2017
966.102.00.0 (06)
All manuals and user guides at all-guides.com
3
4
5
Result
ü The device initialises and the LED on the control
Connect the mains plug.
Open the cover.
Press the power switch.
panel flashes blue. After this, the LED is lit for
10 minutes after the last user detection.
EN
29