Electrical Connection - Dacor DHD30M700WS Instrucciones Para Instalación

Installation
3. Measure from the bottom of the air deflector to the bottom of the hood outlet. Cut the ductwork at the
measured lenght.
4. Seal the connection with clamps.
5. Check that the back draft dampers work properly.

Electrical Connection

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Remove the terminal box cover.
3. Remove the knockout in the terminal box cover and install a UL listed or CSA approved ¹⁄₂" strain relief.
14 ENGLISH
Roof Outlet
Wall
Dimension to
Outlet
Measure
A
A. Knockout
B. Junction Box Cover
12.5
36.6
B