Installation In A Sliding Sash Window - NORPOLE NPPAC8KW Manual Del Propietário

All manuals and user guides at all-guides.com

Installation in a sliding sash window

1) Cut the foam seal (adhesive type) to the proper length
2) Attach the window slider kit to the window stool.
.
3) Cut the foam seal (adhesive type) to the proper length
4) Close the sliding sash securely against the window.
5) Cut the foam seal to an appropriate length to seal the
12
and attach to the window frame. See Fig. 13.
Adjust the length of the window slider kit according to
the height of the window. Modify/cut the window slider
kit if the height of the window is less than 27". Open
the window sash and place the window slider kit on
the window stool. See Fig. 14
and attach to the side of the window. See Fig. 15.
open gap between the sliding sash and outer window
sash. See Fig. 16.