Water Drainage - NORPOLE NPPAC8KW Manual Del Propietário

All manuals and user guides at all-guides.com
14

Water Drainage:

During dehumidifying modes:
1) Remove the drain plug from the back of the unit
2) Install the drain connector (5/8" universal female
mender) with 3/4" hose (locally purchased).
3) For the models without a drain connector, attach
the drain hose directly onto the drain hole.
4) Place the open end of the drain hose directly over
the drain area in your basement floor. Refer to
Fig. 22 & 23.
When the water level of the bottom tray reaches a
predetermined level, the unit will beep eight (8) times
and the display will show "P1". At this time, the air
conditioning/dehumidification process will immediately
stop. However, the fan motor will continue to operate
(this is normal).
1) Carefully move the unit to a drain location, remove
the bottom drain plug and let the water drain
away. Refer to Fig. 24.
2) Restart the air conditioner until the "P1" no longer
appears on the display. If the error repeats call for
service.