Exhaust Hose Installation - NORPOLE NPPAC8KW Manual Del Propietário

All manuals and user guides at all-guides.com

Exhaust hose installation:

The exhaust hose and adaptor must be installed or
removed in accordance with the usage mode.
FAN or DEHUMIDIFY mode
1) Install the window Exhaust Adaptor B onto the
2) Place the exhaust hose over the air outlet opening
The exhaust hose can be installed into the wall
(Not applicable for units without Exhaust Adaptor A,
expansion plugs and wooden screws from Accessories)
1) Prepare a hole in the wall. Install the wall Exhaust
2) Attach the exhaust hose to wall Exhaust Adaptor A.
NOTE: Cover the hole using the adaptor cap when not
in use.
The duct can be compressed or extended moderately
according to the installation requirements. However, it is
recommended to keep the duct length to a minimum.
IMPORTANT:
DO NOT OVER BEND THE DUCT (See Fig. 21)
13
COOL mode
exhaust hose as shown in Fig. 17a or Fig. 17b. Refer
to the previous pages for window kit installation.
(See Fig. 18). Push in to form a tight fit. Flatten the
other end for quick installation (See Fig. 19).
Adaptor A on the wall (outside) by using the four (4)
expansion plugs and wooden screws. Be sure to affix
thoroughly (See Fig. 20).
Install
Remove