Safe Operation - Pontec PondoSwitch Instrucciones De Uso

- EN -
- EN -
Original operating manual. This operating manual belongs with the unit and must always be handed over together with
the unit.
EN
WARNING
WARNING
 If a power cable is damaged, have it replaced immediately by the
authorized customer service or a qualified electrician to prevent
electric shock.
 This unit can be used by children aged 8 and above and by per-
sons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they are supervised or have been
instructed on how to use the unit in a safe way and they under-
stand the hazards involved. Do not allow children to play with the
unit. Only allow children to carry out cleaning and user mainte-
nance under supervision.
Safety information
Electrical connection
• Special regulations apply to electrical installation in outdoor areas. Only allow a qualified electrician to perform the
electrical installation.
– The qualified electrician has the required professional training, knowledge and skills to perform electrical installa-
tions in outdoor areas. The qualified electrician can detect potential risks and adheres to regional and national
standards, regulations and directives.
– For your own safety, please consult a qualified electrician.
• Only connect the unit if the electrical data of the unit and the power supply match.
• Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated fault current of max. 30 mA
by means of a fault current protection device.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash-proof).
• Protect the plug connections from moisture.
• Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated fault current of max. 30 mA
by means of a fault current protection device.

Safe operation

• Never operate the unit if the casing is defective!
• Never operate the unit if an electrical cable is defective!
• Do not carry or pull the unit by its power cable.
• Route lines so that they are protected from damage and nobody can trip over them.
• Always pull the power plug before working on the unit.
• Never make technical modifications to the unit.
• Only carry out work on the unit that is described in this manual.
• Only use original spare parts and accessories.
10