STEINEL Spot Way Manual Del Usuario página 22

Way mounting procedure
• Fit floodlight head on pillar and turn until it clicks into place. (Fig. 4.1)
• Mark drill holes for ground plate. (Fig. 4.2)
• Drill holes and fit ground plugs. (Fig. 4.3)
• Procedure for mounting light on ground. (Fig. 4.4)
• Connect plug. (Fig. 4.5)
• Make settings. ➜ „5. Function"
Mounting procedure for Garden
• Attach ground spike to light. (Fig. 4.6)
• Push light into ground. (Fig. 4.7)
• Connect plug. (Fig. 4.8)
• Make settings. ➜ „5. Function"
Information for NightAuto version
• Make sure that the light-level sensor is not covered (e.g. by leaves).
5. Function
Spot Way NightAuto / Spot Garden NightAuto
Factory settings
– Control dial set to
Twilight setting (Fig. 5.2 D)
The light's chosen response threshold can be infinitely varied from
approx. 2 to 1000 lux.
– Control dial set to
– Control dial set to
For performing the functional test in daylight, the control dial must be set to
Spot Way SC / Spot Garden SC
Factory settings
– Twilight setting:
– Time setting:
Smart Remote app
To configure the light via smartphone or tablet, you must download the STEINEL
Smart Remote app from your app store. You will need a Bluetooth-capable smart-
phone or tablet.
= permanently ON
= permanently ON
= night-time operation (approx. 2 lux)
2000 lux
5 seconds
– 22 –
.