Tool Installation And Starting; Installation And Starting Operations; Warning For The Tool Starting; Filling The Lubrication Oil Reservoir - CAMPAGNOLA T-FOX Manual De Uso Y Mantenimiento

General warning
Compulsory reading of the Use
and Maintenance Manual
Compulsory head protection

4 TOOL INSTALLATION AND STARTING

Installation and starting operations

• Plug the battery (18) into its seat inside the tool housing, until you hear a click.
• Switch on the tool by means of the ON/OFF button (11). The display (9) lights up after a beep.
• The tool is ready to be used.
4.1.1

Warning for the tool starting

WARNING!
Before starting the motor, check that the chain (1) does not touch anything.
•
• Do not work on a tree or a ladder, since it would be extremely dangerous.
• Before starting any cutting task, it is necessary to wear protective clothing.
• Check that all the safety and protection devices are efficient and correctly assembled.
Check the bar (2) and the chain (1) for proper assembly and the chain for adequate tension.
•
• Check all the fixing screws for correct tightening.
4.1.2

Filling the lubrication oil reservoir

• Fill the oil reservoir (16) for the chain (1) lubrication.
• The lack of lubrication may cause chain (1) seizing.
• The lubrication is automatic and does not need any adjustment.
Pag. 34
Compulsory adequate clothing
Compulsory hand protection
Compulsory feet protection
Use and maintenance manual – Translation of
original Instruction.: 01, Date 24/11/2021