Sauder Shoal Creek 411236 Manual Del Usuario página 19

Step 15
To mount the Mirror to the 411201 Dresser, you should fi rst cut
å
out the small cut-out squares in the Dresser Back. Perforated
cut-out lines have been provided. Then, remove the top Drawers
from the Dresser.
Insert the short portion of the MIRROR BRACKETS (12G) into
å
the holes in the Dresser Back.
Fasten the short portion of the MIRROR BRACKETS (12G) to the
å
Dresser Top. Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
Now, fasten the Mirror to the MIRROR BRACKETS (12G).
å
Carefully place the Mirror on the Dresser Top and
line up the holes in the BRACKETS with the
holes in the MOLDINGS (M2 and N2). Use
six BLACK 9/16" LARGE HEAD SCREWS (1S).
www.sauder.com/services
M2
411201
Dresser
BLACK 9/16" LARGE HEAD SCREW
411236
Pro Tip: Lift with your
legs. And, you know,
your arms.
N2
12G
(12 used in this step)
1S
Page 19