Publicidad
Idiomas disponibles
Idiomas disponibles
4. Inserting the batteries
1.
Unscrew the cap at the bottom of the appliance.
2.
Remove the battery compartment from the housing.
3.
Insert 6 AAA 1.5 V batteries into the battery compartment.
4.
Replace the battery compartment back into the housing and screw the cap
back on.
5. Filling the appliance
1.
Place the appliance in an upright position and remove the grinder head by
holding the housing and turning the head counter-clockwise.
2.
Fill the chamber with salt or pepper through the side opening. Take care
not to fill too much. This prevents overfilling the grinder.
3.
Replace the head and turn clockwise to lock it.
6. Initial use
To start grinding, turn the grinder upside down, so that the head is facing down.
The appliance automatically starts to grind.
Turn the grinding level dial, which is located on the grinding head to vary from
fine to coarse grinding.
7. Cleaning and Care
Do not immerse the appliance in water.
•
Remove the batteries before cleaning.
•
Dismantle all the parts.
•
Wipe the appliance with a damp cloth.
8. Safety instructions and disclaimer
Never try to open the appliance to repair or make modifications. Avoid contact
with the mains voltage. Do not short-circuit the product. The appliance is not ap-
proved for outdoor use. Therefore please use it only in dry surroundings. Protect it
from high humidity, water and snow. Do not expose the appliance to high temper-
atures. Do not expose the appliance to sudden changes in temperature or strong
vibrations, as this could damage the electronic components.
Check the appliance for damage before using it. The appliance should not be used
if it has been subject to impact or has been damaged in any other manner. Please
comply with the local regulations and restrictions. Do not use the appliance for
purposes other than those described in the user manual. This product is not a
12
English
Publicidad
