Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Replacing carbon brushes
► Fig.19: 1. Limit mark
Check the carbon brushes regularly.
Replace them when they wear down to the limit mark.
Keep the carbon brushes clean and free to slip in the
holders. Both carbon brushes should be replaced at the
same time. Use only identical carbon brushes.
1.
Use a screwdriver to remove the brush holder
caps.
2.
Take out the worn carbon brushes, insert the new
ones and secure the brush holder caps.
► Fig.20: 1. Brush holder cap
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Straight & groove forming bits
•
Edge forming bits
•
Laminate trimming bits
•
Straight guide
•
Templet guides
•
Lock nut
•
Collet cone
•
Wrench
•
Dust nozzle assembly
•
Nozzle assembly
•
Hose complete
•
Joint
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Router bits
Straight bit
► Fig.21
D
6
1/4"
8
6
1/4"
6
1/4"
"U"Grooving bit
► Fig.22
D
A
6
6
1/4"
"V"Grooving bit
► Fig.23
D
A
1/4"
20
Dovetail bit
► Fig.24
D
A
8
14.5
8
14.5
8
12
Drill point flush trimming bit
► Fig.25
D
A
8
8
6
6
1/4"
11 ENGLISH
A
L1
20
50
8
60
8
50
6
50
L1
L2
60
28
L1
L2
50
15
L1
L2
55
10
55
14.5
50
9
L1
L2
60
20
60
18
Unit:mm
L2
15
25
18
18
Unit:mm
R
3
Unit:mm
θ
90°
Unit:mm
θ
35°
23°
30°
Unit:mm
L3
35
28
Publicidad
Tabla de contenido
